Differences

This shows you the differences between two versions of the page.

--- list_of_materials [2023/07/29 20:31]
admin
+++ list_of_materials [2024/04/09 23:40] (current)
al
@@ Line 1: / Line 1: @@
+[[things_to_buy|Things to buy]]
 ==== Gugusse Compact ====
 The Gugusse Compact is an upgrade from the Gugusse Roller.  The Gugusse Compact base combines in a single piece what was 3 pieces in the Gugusse Roller; the Tensioner Base, the Gate Base and the Main Drive.  The Gugusse Roller's adjustable Gate Jaws and hole sensor are now replaced by non-adjustable but swappable Gates and hole sensors, you have to print one of each for each film format you wish to scan.
-The rollers are now fixed size, you need to print 8 for each film format you wish to scan (8mm and super8 share the same rollers, but not the same gate and not the same hole sensor).  You need to make 2 turntables (like the old Gugusse Roller).  You need to make a controlboard (like the old Gugusse Roller).  You need to print 1 BigSwivelArm.stl but 2 SmallSwingingArm.stl.  35mm doesn't need ReelRaisers but the other formats do, you'll need to print 2 for each format you'll scan.
+The rollers are now fixed size, you need to print eight for each film format you wish to scan (8mm and Super-8 sha-re the same rollers, but not the same gate and not the same hole sensor).  You need to make 2 turntables.  You need to make a control board.  You need to print one BigSwivelArm.stl but two SmallSwingingArm.stl.  35mm doesn't need ReelRaisers but the other formats do, you'll need to print two for each format you'll scan.
-The documentation is still transitionning from the older deprecated Gugusse Roller to the newer Gugusse Compact, until it's finalize you can come and see us at: [[https://www.facebook.com/groups/552059449113276]] for questions.
+The documentation is available on the [[build_instructions|Build Instructions]] page.  You can also come and see us at: [[https://www.facebook.com/groups/552059449113276]] if you have any questions.
+=== DOWNLOAD THIS ===
+Download the project STL and Gerber files here: {{ ::gugussecompact_20240410.zip |}}  \\
+Updated April 10, 2024, Changed: Added Modified Models
-But this file is up to date with the latest Gugusse Compact:
-Download the project STL and Gerber files here:
-{{ :gugussecompact_20230729.zip |}}
 === Files to print ===
 I used a Creality CR-10 to 3D print my prototype so I would recommend this printer but there are some others that are as good (or maybe better, I wouldn't know).
-Start with the GugusseCompact.stl, you need to know if your 3D printer is big enough before getting yourself into this gig:
+Start with the GugusseCompact.stl and/or a turntable main table, you need to know if your 3D printer is big enough before getting yourself into this project:
 {{:gcbasepic.jpg?400|}}
 ----
-== Turn Tables ==
+== Turntables ==
-{{:oneturntable.png?direct&400|One Turn Table}}
+{{:oneturntable.png?direct&400|One Turntable}}
-  * Note: you need to print 2 turn tables
+  * Note: You need to print 2 Turntables
   * No required color.
-  * recommendation: printing the gear in soft PLA should help make the Gugusse more silent.
-----

Gugusse Compact

User Tools

Site Tools

Differences

Page Tools