This is an old revision of the document!
Table of Contents
Build Instructions
Turntables
You'll need two Turntables to feed and takeup film. Detailed build instructions below.
Detailed Build Instructions: turntablebuildv5.pdf
Main Base
The Main Base is the heart of the Gugusse Compact. Detailed build instructions below. Also below, is a template to print guidelines for the diffuser filters.
Detailed Build Instructions: compactmainbase1.0f.pdf
Filter Template for Laser Printer: gugussefilterv2.pdf
Layout Instructions
This document shows how to put the various parts together so you can start using your Gugusse Compact.
Detailed Layout Instructions: gugussecompactlayout_1.0.pdf
Legacy Instructions:
How To assemble and connect the optocoupler.
With a multimeter it's easy to figure out if two of the wires are of the same phase, it's when you can mesure a resistance value between them (at the condition that it is a 4 wires stepper motor. As long as you have the 2 phases connected it's not a big issue if the rotation is inverted as you can change its direction in the file hardwarecfg.json with the obvious setting “invert”, one for each of the 3 motors.
